Dynasty 210 vs Handler 210i

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Dynasty 210	Handler 210i
Process	AC/DC TIG (GTAW), pulsed TIG (GTAW-P), and stick (SMAW). Source	MIG and flux-cored. The included drive roll covers solid and flux-cored wire, and spool-gun circuitry is described for aluminum wire. Source
Output amp range	1–210 A DC and 2–210 A AC. Source	120 V: 30–140 A. 240 V: 30–210 A. Source
Rated duty cycle	210 A at 18.4 V, 60% duty cycle. Source	120 V, 15 A: 45 A at 16.3 VDC, 100% duty cycle. 120 V, 20 A: 90 A at 18.5 VDC, 25% duty cycle, and 60 A at 17.0 VDC, 100% duty cycle. 240 V: 210 A at 24.5 VDC, 25% duty cycle, and 105 A at 19.3 VDC, 100% duty cycle. Source
Input voltage and plug	120–480 V, 3-phase or 1-phase. The quick specs do not print input amperes. Source	120 V or 240 V, 50/60 Hz, with an included adapter for both. Amps input at rated output: 13.8 A on the 120 V, 15 A row; 27.6 A on the 120 V, 20 A row; 44.3 A on 240 V. Source
Wire or rod size	Not published by manufacturer Source	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source
Weight	47 lb. (21.3 kg). Source	26 lb. The sheet says the machine weighs only 26 pounds. Source
Material thickness	Not published by manufacturer Source	Mild steel thickness range 24 ga.–3/8 in., in a single pass, with thicker material by multiple passes. Source