Dynasty 210 vs MIG285

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Dynasty 210	MIG285
Process	AC/DC TIG (GTAW), pulsed TIG (GTAW-P), and stick (SMAW). Source	The specifications table says output type MIG, lift TIG, and stick. The overview also names flux core. Source
Output amp range	1–210 A DC and 2–210 A AC. Source	Max rated output: MIG 285 A, TIG 250 A, stick 250 A. The duty table prints MIG 285 A on 240 V and 120 A on 120 V, and stick and TIG 250 A on 240 V and 120 A on 120 V. Source
Rated duty cycle	210 A at 18.4 V, 60% duty cycle. Source	MIG: 30% at 285 A on 240 V and 30% at 120 A on 120 V. Stick: 30% at 250 A on 240 V and 30% at 120 A on 120 V. TIG: 30% at 250 A on 240 V and 30% at 120 A on 120 V. Source
Input voltage and plug	120–480 V, 3-phase or 1-phase. The quick specs do not print input amperes. Source	1-phase, 120 V/240 V. Max inrush (I1max), columns MIG / stick / TIG: 120 V 34.2 / 42.5 / 25.3 A, and 240 V 57.4 / 53.5 / 35.7 A. Max rated (I1eff): 120 V 18.7 / 23.3 / 13.9 A, and 240 V 27.4 / 29.3 / 19.6 A. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	47 lb. (21.3 kg). Source	The page says “weighing under 60 lbs.” It does not print a single net-weight number. Source
Material thickness	Not published by manufacturer Source	The overview says the 285 A output can weld materials up to 5/8 inch thick. Source