Dynasty 210 vs Multi-Handler 200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Dynasty 210	Multi-Handler 200
Process	AC/DC TIG (GTAW), pulsed TIG (GTAW-P), and stick (SMAW). Source	MIG, flux-cored, DC TIG, and stick. Source
Output amp range	1–210 A DC and 2–210 A AC. Source	MIG/flux-cored: 30–200 A. DC TIG: 20–200 A. Stick: 30–200 A. The table narrows 120 V MIG to 30–120 A, 120 V TIG to 20–140 A, and 120 V stick to 30–100 A. Source
Rated duty cycle	210 A at 18.4 V, 60% duty cycle. Source	At 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V; DC TIG 105 A at 14.2 V on 120 V and 165 A at 16.6 V on 240 V; stick 90 A at 23.6 V on 120 V and 140 A at 25.6 V on 240 V. Source
Input voltage and plug	120–480 V, 3-phase or 1-phase. The quick specs do not print input amperes. Source	120 V or 240 V, 50/60 Hz. MVP plugs: 5-15P (120 V, 15 A) and 6-50P (240 V, 50 A). Amps input at rated output, MIG: 23.0 A at 120 V and 19.0 A at 240 V. DC TIG: 16.7 A and 14.7 A. Stick: 22.0 A and 17.9 A. Source
Wire or rod size	Not published by manufacturer Source	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed on the product page is 60–650 ipm. Source
Weight	47 lb. (21.3 kg). Source	38.4 lb on the product page. The spec sheet says the machine weighs under 39 pounds. Source
Material thickness	Not published by manufacturer Source	Mild steel: MIG/flux-cored 24 ga.–3/8 in., DC TIG 22 ga.–3/16 in., stick 16 ga.–3/8 in. Source