WeldFactsSheet numbers only

Home CompareHandler 140EZ vs Handler 210MVP

Handler 140EZ vs Handler 210MVP

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By · Checked · How we verify

Spec Handler 140EZ Handler 210MVP
Process MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator.
Source
 MIG and flux-cored. Spool-gun circuitry is described for aluminum wire. A gas solenoid and regulator are included.
Source
Output amp range 30–140 A.
Source
 115 V: 25–140 A. 230 V: 25–210 A.
Source
Rated duty cycle 90 A at 18.5 VDC, 30% duty cycle.
Source
 115 V: 90 A at 19 VDC, 20% duty cycle. 230 V: 150 A at 23 VDC, 30% duty cycle.
Source
Input voltage and plug 120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named.
Source
 115 V or 230 V, 60 Hz. Amps input at rated output: 20 A at 115 V and 24 A at 230 V. The cord includes 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs.
Source
Wire or rod size Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire.
Source
 Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire.
Source
Weight Not published by manufacturer
Source
 79 lb. (35.8 kg).
Source
Material thickness Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep.
Source
 Mild steel thickness range 24 ga.–3/8 in., in a single pass. The sheet says thicker material is run with multiple passes and does not print that second maximum.
Source

Outlet check, Handler 140EZ · Outlet check, Handler 210MVP