WeldFactsSheet numbers only

Home CompareHandler 140EZ vs Multi-Handler 200

Handler 140EZ vs Multi-Handler 200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By · Checked · How we verify

Spec Handler 140EZ Multi-Handler 200
Process MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator.
Source
 MIG, flux-cored, DC TIG, and stick.
Source
Output amp range 30–140 A.
Source
 MIG/flux-cored: 30–200 A. DC TIG: 20–200 A. Stick: 30–200 A. The table narrows 120 V MIG to 30–120 A, 120 V TIG to 20–140 A, and 120 V stick to 30–100 A.
Source
Rated duty cycle 90 A at 18.5 VDC, 30% duty cycle.
Source
 At 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V; DC TIG 105 A at 14.2 V on 120 V and 165 A at 16.6 V on 240 V; stick 90 A at 23.6 V on 120 V and 140 A at 25.6 V on 240 V.
Source
Input voltage and plug 120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named.
Source
 120 V or 240 V, 50/60 Hz. MVP plugs: 5-15P (120 V, 15 A) and 6-50P (240 V, 50 A). Amps input at rated output, MIG: 23.0 A at 120 V and 19.0 A at 240 V. DC TIG: 16.7 A and 14.7 A. Stick: 22.0 A and 17.9 A.
Source
Wire or rod size Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire.
Source
 Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed on the product page is 60–650 ipm.
Source
Weight Not published by manufacturer
Source
 38.4 lb on the product page. The spec sheet says the machine weighs under 39 pounds.
Source
Material thickness Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep.
Source
 Mild steel: MIG/flux-cored 24 ga.–3/8 in., DC TIG 22 ga.–3/16 in., stick 16 ga.–3/8 in.
Source

Outlet check, Handler 140EZ · Outlet check, Multi-Handler 200