Handler 140EZ vs Power MIG 215 MPi

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Handler 140EZ	Power MIG 215 MPi
Process	MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. Source	MIG, flux-cored, DC stick, and DC TIG. Source
Output amp range	30–140 A. Source	120 V: 20–140 A DC. 230 V: 20–220 A DC. Max OCV 56 V. Source
Rated duty cycle	90 A at 18.5 VDC, 30% duty cycle. Source	215 A / 24.8 V / 30%. The specifications table prints that one duty-cycle figure beside input power 120/230/1/60. 215 A is above the printed 120 V output range of 20–140 A. Source
Input voltage and plug	120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. Source	120/230/1/60. Input current at rated output: 120 VAC, 15 A effective and 22 A max; 230 VAC, 15.9 A effective and 29 A max. Source
Wire or rod size	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Wire feed speed 50–500 ipm (1.3–12.7 m/min). A wire-diameter range is not in the specifications table. Source
Weight	Not published by manufacturer Source	48 lb (21.8 kg). Source
Material thickness	Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. Source	Not published by manufacturer Source