Handler 140EZ vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Handler 140EZ	TIG200
Process	MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. Source	DC TIG and stick. Source
Output amp range	30–140 A. Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	90 A at 18.5 VDC, 30% duty cycle. Source	Not published by manufacturer Source
Input voltage and plug	120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Not published by manufacturer Source
Weight	Not published by manufacturer Source	Not published by manufacturer Source
Material thickness	Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source