Handler 140EZ vs TIG225X

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Handler 140EZ	TIG225X
Process	MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. Source	AC/DC TIG and stick. The page tells the operator to use AC for aluminum and magnesium and DC for steel, stainless, and most other metals. Source
Output amp range	30–140 A. Source	TIG 10–225 A. Stick 10–180 A. Source
Rated duty cycle	90 A at 18.5 VDC, 30% duty cycle. Source	TIG: 40% at max output, and 100% at 108 A on 120 V or 155 A on 240 V. Stick: 40% at max output, and 100% at 76 A on 120 V or 139 A on 240 V. Source
Input voltage and plug	120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. Source	120 V / 240 V, single-phase, 50/60 Hz. Input amperes and a plug name are not in the specifications list. Source
Wire or rod size	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Not published by manufacturer Source
Weight	Not published by manufacturer Source	41 lb (18.5 kg). Source
Material thickness	Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. Source	The page says it can weld materials up to 1/2 inch thick. Source