Handler 140EZ vs TIG230

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Handler 140EZ	TIG230
Process	MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. Source	AC/DC TIG and stick. The page lists nine AC waveforms, including square, sine, triangle, and hybrid. Source
Output amp range	30–140 A. Source	TIG 2–230 A. Stick 10–200 A. Source
Rated duty cycle	90 A at 18.5 VDC, 30% duty cycle. Source	TIG: 35% at 230 A, 60% at 175 A, 100% at 136 A. Stick: 35% at 200 A, 60% at 152 A, 100% at 118 A. The duty lines are not split by voltage. Source
Input voltage and plug	120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. Source	90–275 V, 50–60 Hz. That range covers a 120 V outlet and a 240 V outlet. Input amperes are not in the specifications block. Source
Wire or rod size	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Not published by manufacturer Source
Weight	Not published by manufacturer Source	46 lb. Dimensions 22 in. long, 8 in. wide, 16 in. high. Source
Material thickness	Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. Source	Not published by manufacturer Source