Handler 140EZ vs TIG325X

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Handler 140EZ	TIG325X
Process	MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. Source	AC/DC TIG and stick. The output line splits TIG into 5–325 A DC and 10–325 A AC. Source
Output amp range	30–140 A. Source	TIG 10–325 A (5–325 A DC, 10–325 A AC). Stick 20–250 A. Source
Rated duty cycle	90 A at 18.5 VDC, 30% duty cycle. Source	TIG: 40% at 325 A, 60% at 280 A, 100% at 250 A. Stick: 40% at 250 A, 60% at 220 A, 100% at 180 A. The duty lines are not split by voltage. Source
Input voltage and plug	120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. Source	120 V / 240 V, single-phase, 50/60 Hz. Input amperes are not in the specifications list. Source
Wire or rod size	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Not published by manufacturer Source
Weight	Not published by manufacturer Source	73.24 lb (about 33.2 kg). Source
Material thickness	Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. Source	Not published by manufacturer Source