Home CompareHandler 210i vs Power MIG 215 MPi
Handler 210i vs Power MIG 215 MPi
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Handler 210i | Power MIG 215 MPi |
|---|---|---|
| Process | MIG and flux-cored. The included drive roll covers solid and flux-cored wire, and spool-gun circuitry is described for aluminum wire. | MIG, flux-cored, DC stick, and DC TIG. |
| Output amp range | 120 V: 30–140 A. 240 V: 30–210 A. | 120 V: 20–140 A DC. 230 V: 20–220 A DC. Max OCV 56 V. |
| Rated duty cycle | 120 V, 15 A: 45 A at 16.3 VDC, 100% duty cycle. 120 V, 20 A: 90 A at 18.5 VDC, 25% duty cycle, and 60 A at 17.0 VDC, 100% duty cycle. 240 V: 210 A at 24.5 VDC, 25% duty cycle, and 105 A at 19.3 VDC, 100% duty cycle. | 215 A / 24.8 V / 30%. The specifications table prints that one duty-cycle figure beside input power 120/230/1/60. 215 A is above the printed 120 V output range of 20–140 A. |
| Input voltage and plug | 120 V or 240 V, 50/60 Hz, with an included adapter for both. Amps input at rated output: 13.8 A on the 120 V, 15 A row; 27.6 A on the 120 V, 20 A row; 44.3 A on 240 V. | 120/230/1/60. Input current at rated output: 120 VAC, 15 A effective and 22 A max; 230 VAC, 15.9 A effective and 29 A max. |
| Wire or rod size | Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. | Wire feed speed 50–500 ipm (1.3–12.7 m/min). A wire-diameter range is not in the specifications table. |
| Weight | 26 lb. The sheet says the machine weighs only 26 pounds. | 48 lb (21.8 kg). |
| Material thickness | Mild steel thickness range 24 ga.–3/8 in., in a single pass, with thicker material by multiple passes. | Not published by manufacturer |
Outlet check, Handler 210i · Outlet check, Power MIG 215 MPi