Handler 210i vs Power MIG 260

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Handler 210i	Power MIG 260
Process	MIG and flux-cored. The included drive roll covers solid and flux-cored wire, and spool-gun circuitry is described for aluminum wire. Source	MIG and flux-cored. Source
Output amp range	120 V: 30–140 A. 240 V: 30–210 A. Source	30–300 A. Wire feed speed 50–700 ipm (1.3–17.7 m/min). Source
Rated duty cycle	120 V, 15 A: 45 A at 16.3 VDC, 100% duty cycle. 120 V, 20 A: 90 A at 18.5 VDC, 25% duty cycle, and 60 A at 17.0 VDC, 100% duty cycle. 240 V: 210 A at 24.5 VDC, 25% duty cycle, and 105 A at 19.3 VDC, 100% duty cycle. Source	250 A / 26.5 V / 40%. Source
Input voltage and plug	120 V or 240 V, 50/60 Hz, with an included adapter for both. Amps input at rated output: 13.8 A on the 120 V, 15 A row; 27.6 A on the 120 V, 20 A row; 44.3 A on 240 V. Source	208/230/460/575 V, 1-phase, 60 Hz. Input current at rated output: 59/55/27/21 A in that voltage order. The 230 V figure is 55 A. This check treats that 230 V figure as the 240 V outlet class. Source
Wire or rod size	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Not published by manufacturer Source
Weight	26 lb. The sheet says the machine weighs only 26 pounds. Source	247 lb (112 kg). Dimensions 37.3 x 18 x 40.4 in. Source
Material thickness	Mild steel thickness range 24 ga.–3/8 in., in a single pass, with thicker material by multiple passes. Source	Not published by manufacturer Source