Home CompareHandler 210i vs Square Wave TIG 200
Handler 210i vs Square Wave TIG 200
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Handler 210i | Square Wave TIG 200 |
|---|---|---|
| Process | MIG and flux-cored. The included drive roll covers solid and flux-cored wire, and spool-gun circuitry is described for aluminum wire. | AC/DC TIG and stick. |
| Output amp range | 120 V: 30–140 A. 240 V: 30–210 A. | 120 V: TIG 10–125 A and stick 10–90 A. 230 V: TIG 10–200 A and stick 10–170 A. A footnote prints 120 V AC TIG 110 A / 25%. |
| Rated duty cycle | 120 V, 15 A: 45 A at 16.3 VDC, 100% duty cycle. 120 V, 20 A: 90 A at 18.5 VDC, 25% duty cycle, and 60 A at 17.0 VDC, 100% duty cycle. 240 V: 210 A at 24.5 VDC, 25% duty cycle, and 105 A at 19.3 VDC, 100% duty cycle. | 120 V TIG: 125 A/25%, 100 A/40%, 85 A/60%. 120 V stick: 75 A/20%, 65 A/60%. 230 V TIG: 200 A/25%, 160 A/40%, 130 A/60%. 230 V stick: 170 A/20%, 100 A/60%. |
| Input voltage and plug | 120 V or 240 V, 50/60 Hz, with an included adapter for both. Amps input at rated output: 13.8 A on the 120 V, 15 A row; 27.6 A on the 120 V, 20 A row; 44.3 A on 240 V. | 120/1/50/60 and 230/1/50/60. Input current at those rated outputs runs from 14 A to 21 A on 120 V and from 13 A to 25 A on 230 V. The highest 120 V figure is 21 A and the highest 230 V figure is 25 A. 120/230 V input cords are included. |
| Wire or rod size | Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. | Not published by manufacturer |
| Weight | 26 lb. The sheet says the machine weighs only 26 pounds. | 46 lb (21 kg). Dimensions 14 x 10.75 x 19.25 in. |
| Material thickness | Mild steel thickness range 24 ga.–3/8 in., in a single pass, with thicker material by multiple passes. | Not published by manufacturer |
Outlet check, Handler 210i · Outlet check, Square Wave TIG 200