Handler 210i vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By the WeldFacts editorial team · Checked 2 November 2026 · How we verify

Spec	Handler 210i	TIG200
Process	MIG and flux-cored. The included drive roll covers solid and flux-cored wire, and spool-gun circuitry is described for aluminum wire. Source	DC TIG and stick. Source
Output amp range	120 V: 30–140 A. 240 V: 30–210 A. Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	120 V, 15 A: 45 A at 16.3 VDC, 100% duty cycle. 120 V, 20 A: 90 A at 18.5 VDC, 25% duty cycle, and 60 A at 17.0 VDC, 100% duty cycle. 240 V: 210 A at 24.5 VDC, 25% duty cycle, and 105 A at 19.3 VDC, 100% duty cycle. Source	Not published by manufacturer Source
Input voltage and plug	120 V or 240 V, 50/60 Hz, with an included adapter for both. Amps input at rated output: 13.8 A on the 120 V, 15 A row; 27.6 A on the 120 V, 20 A row; 44.3 A on 240 V. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Not published by manufacturer Source
Weight	26 lb. The sheet says the machine weighs only 26 pounds. Source	Not published by manufacturer Source
Material thickness	Mild steel thickness range 24 ga.–3/8 in., in a single pass, with thicker material by multiple passes. Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source

Outlet check, Handler 210i · Outlet check, TIG200