WeldFactsSheet numbers only

Home CompareHandler 210MVP vs Power MIG 210 MP

Handler 210MVP vs Power MIG 210 MP

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By · Checked · How we verify

Spec Handler 210MVP Power MIG 210 MP
Process MIG and flux-cored. Spool-gun circuitry is described for aluminum wire. A gas solenoid and regulator are included.
Source
 MIG, stick, TIG, and flux-cored. The rated-output column is labeled MIG.
Source
Output amp range 115 V: 25–140 A. 230 V: 25–210 A.
Source
 120 V: 20–140 A DC, max OCV 56. 230 V: 20–220 A DC, max OCV 56. Wire feed speed 50–500 ipm (1.3–12.7 m/min).
Source
Rated duty cycle 115 V: 90 A at 19 VDC, 20% duty cycle. 230 V: 150 A at 23 VDC, 30% duty cycle.
Source
 MIG: 120 V, 100 A / 19.0 V / 40%. 230 V, 200 A / 24 V / 25%.
Source
Input voltage and plug 115 V or 230 V, 60 Hz. Amps input at rated output: 20 A at 115 V and 24 A at 230 V. The cord includes 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs.
Source
 120/1/60 and 230/1/60. Effective input current at rated output: 15 A at 120 V and 14.7 A at 230 V. 120 V and 230 V input cables are included with K3963-1.
Source
Wire or rod size Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire.
Source
 Included drive rolls are 0.025–0.030 in. (0.6–0.8 mm) and 0.035 in. (0.9 mm), plus 0.030–0.045 in. (0.8–1.1 mm) knurled drive rolls. The specifications table itself does not print a wire-capacity range.
Source
Weight 79 lb. (35.8 kg).
Source
 40 lb (18 kg).
Source
Material thickness Mild steel thickness range 24 ga.–3/8 in., in a single pass. The sheet says thicker material is run with multiple passes and does not print that second maximum.
Source
 Not published by manufacturer
Source

Outlet check, Handler 210MVP · Outlet check, Power MIG 210 MP