Handler 210MVP vs TIG230

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Handler 210MVP	TIG230
Process	MIG and flux-cored. Spool-gun circuitry is described for aluminum wire. A gas solenoid and regulator are included. Source	AC/DC TIG and stick. The page lists nine AC waveforms, including square, sine, triangle, and hybrid. Source
Output amp range	115 V: 25–140 A. 230 V: 25–210 A. Source	TIG 2–230 A. Stick 10–200 A. Source
Rated duty cycle	115 V: 90 A at 19 VDC, 20% duty cycle. 230 V: 150 A at 23 VDC, 30% duty cycle. Source	TIG: 35% at 230 A, 60% at 175 A, 100% at 136 A. Stick: 35% at 200 A, 60% at 152 A, 100% at 118 A. The duty lines are not split by voltage. Source
Input voltage and plug	115 V or 230 V, 60 Hz. Amps input at rated output: 20 A at 115 V and 24 A at 230 V. The cord includes 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs. Source	90–275 V, 50–60 Hz. That range covers a 120 V outlet and a 240 V outlet. Input amperes are not in the specifications block. Source
Wire or rod size	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Not published by manufacturer Source
Weight	79 lb. (35.8 kg). Source	46 lb. Dimensions 22 in. long, 8 in. wide, 16 in. high. Source
Material thickness	Mild steel thickness range 24 ga.–3/8 in., in a single pass. The sheet says thicker material is run with multiple passes and does not print that second maximum. Source	Not published by manufacturer Source