Handler 210MVP vs TIG325X

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Handler 210MVP	TIG325X
Process	MIG and flux-cored. Spool-gun circuitry is described for aluminum wire. A gas solenoid and regulator are included. Source	AC/DC TIG and stick. The output line splits TIG into 5–325 A DC and 10–325 A AC. Source
Output amp range	115 V: 25–140 A. 230 V: 25–210 A. Source	TIG 10–325 A (5–325 A DC, 10–325 A AC). Stick 20–250 A. Source
Rated duty cycle	115 V: 90 A at 19 VDC, 20% duty cycle. 230 V: 150 A at 23 VDC, 30% duty cycle. Source	TIG: 40% at 325 A, 60% at 280 A, 100% at 250 A. Stick: 40% at 250 A, 60% at 220 A, 100% at 180 A. The duty lines are not split by voltage. Source
Input voltage and plug	115 V or 230 V, 60 Hz. Amps input at rated output: 20 A at 115 V and 24 A at 230 V. The cord includes 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs. Source	120 V / 240 V, single-phase, 50/60 Hz. Input amperes are not in the specifications list. Source
Wire or rod size	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Not published by manufacturer Source
Weight	79 lb. (35.8 kg). Source	73.24 lb (about 33.2 kg). Source
Material thickness	Mild steel thickness range 24 ga.–3/8 in., in a single pass. The sheet says thicker material is run with multiple passes and does not print that second maximum. Source	Not published by manufacturer Source