IronMan 240 vs Power MIG 210 MP

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	IronMan 240	Power MIG 210 MP
Process	MIG and flux-cored. Spool-gun connection is described for aluminum wire. Source	MIG, stick, TIG, and flux-cored. The rated-output column is labeled MIG. Source
Output amp range	30–280 A. Source	120 V: 20–140 A DC, max OCV 56. 230 V: 20–220 A DC, max OCV 56. Wire feed speed 50–500 ipm (1.3–12.7 m/min). Source
Rated duty cycle	200 A at 24 VDC, 60% duty cycle. Source	MIG: 120 V, 100 A / 19.0 V / 40%. 230 V, 200 A / 24 V / 25%. Source
Input voltage and plug	208 V and 240 V. Amperes input at rated load: 57.0 A at 208 V and 50.8 A at 240 V, on the 200 A, 60% row. A power cord with plug is included. The plug is not named. Source	120/1/60 and 230/1/60. Effective input current at rated output: 15 A at 120 V and 14.7 A at 230 V. 120 V and 230 V input cables are included with K3963-1. Source
Wire or rod size	The gun note on the sheet says .023–.045 in. (0.6–1.1 mm) wire, and the included drive roll is a dual-groove .030/.035 in. roll. Wire feed speed is 50–700 ipm. Source	Included drive rolls are 0.025–0.030 in. (0.6–0.8 mm) and 0.035 in. (0.9 mm), plus 0.030–0.045 in. (0.8–1.1 mm) knurled drive rolls. The specifications table itself does not print a wire-capacity range. Source
Weight	186 lb. Source	40 lb (18 kg). Source
Material thickness	Mild steel thickness range 24 ga.–1/2 in. (13 mm). Source	Not published by manufacturer Source