IronMan 240 vs Power MIG 215 MPi

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	IronMan 240	Power MIG 215 MPi
Process	MIG and flux-cored. Spool-gun connection is described for aluminum wire. Source	MIG, flux-cored, DC stick, and DC TIG. Source
Output amp range	30–280 A. Source	120 V: 20–140 A DC. 230 V: 20–220 A DC. Max OCV 56 V. Source
Rated duty cycle	200 A at 24 VDC, 60% duty cycle. Source	215 A / 24.8 V / 30%. The specifications table prints that one duty-cycle figure beside input power 120/230/1/60. 215 A is above the printed 120 V output range of 20–140 A. Source
Input voltage and plug	208 V and 240 V. Amperes input at rated load: 57.0 A at 208 V and 50.8 A at 240 V, on the 200 A, 60% row. A power cord with plug is included. The plug is not named. Source	120/230/1/60. Input current at rated output: 120 VAC, 15 A effective and 22 A max; 230 VAC, 15.9 A effective and 29 A max. Source
Wire or rod size	The gun note on the sheet says .023–.045 in. (0.6–1.1 mm) wire, and the included drive roll is a dual-groove .030/.035 in. roll. Wire feed speed is 50–700 ipm. Source	Wire feed speed 50–500 ipm (1.3–12.7 m/min). A wire-diameter range is not in the specifications table. Source
Weight	186 lb. Source	48 lb (21.8 kg). Source
Material thickness	Mild steel thickness range 24 ga.–1/2 in. (13 mm). Source	Not published by manufacturer Source