IronMan 240 vs Power MIG 260

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	IronMan 240	Power MIG 260
Process	MIG and flux-cored. Spool-gun connection is described for aluminum wire. Source	MIG and flux-cored. Source
Output amp range	30–280 A. Source	30–300 A. Wire feed speed 50–700 ipm (1.3–17.7 m/min). Source
Rated duty cycle	200 A at 24 VDC, 60% duty cycle. Source	250 A / 26.5 V / 40%. Source
Input voltage and plug	208 V and 240 V. Amperes input at rated load: 57.0 A at 208 V and 50.8 A at 240 V, on the 200 A, 60% row. A power cord with plug is included. The plug is not named. Source	208/230/460/575 V, 1-phase, 60 Hz. Input current at rated output: 59/55/27/21 A in that voltage order. The 230 V figure is 55 A. This check treats that 230 V figure as the 240 V outlet class. Source
Wire or rod size	The gun note on the sheet says .023–.045 in. (0.6–1.1 mm) wire, and the included drive roll is a dual-groove .030/.035 in. roll. Wire feed speed is 50–700 ipm. Source	Not published by manufacturer Source
Weight	186 lb. Source	247 lb (112 kg). Dimensions 37.3 x 18 x 40.4 in. Source
Material thickness	Mild steel thickness range 24 ga.–1/2 in. (13 mm). Source	Not published by manufacturer Source