IronMan 240 vs Square Wave TIG 200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	IronMan 240	Square Wave TIG 200
Process	MIG and flux-cored. Spool-gun connection is described for aluminum wire. Source	AC/DC TIG and stick. Source
Output amp range	30–280 A. Source	120 V: TIG 10–125 A and stick 10–90 A. 230 V: TIG 10–200 A and stick 10–170 A. A footnote prints 120 V AC TIG 110 A / 25%. Source
Rated duty cycle	200 A at 24 VDC, 60% duty cycle. Source	120 V TIG: 125 A/25%, 100 A/40%, 85 A/60%. 120 V stick: 75 A/20%, 65 A/60%. 230 V TIG: 200 A/25%, 160 A/40%, 130 A/60%. 230 V stick: 170 A/20%, 100 A/60%. Source
Input voltage and plug	208 V and 240 V. Amperes input at rated load: 57.0 A at 208 V and 50.8 A at 240 V, on the 200 A, 60% row. A power cord with plug is included. The plug is not named. Source	120/1/50/60 and 230/1/50/60. Input current at those rated outputs runs from 14 A to 21 A on 120 V and from 13 A to 25 A on 230 V. The highest 120 V figure is 21 A and the highest 230 V figure is 25 A. 120/230 V input cords are included. Source
Wire or rod size	The gun note on the sheet says .023–.045 in. (0.6–1.1 mm) wire, and the included drive roll is a dual-groove .030/.035 in. roll. Wire feed speed is 50–700 ipm. Source	Not published by manufacturer Source
Weight	186 lb. Source	46 lb (21 kg). Dimensions 14 x 10.75 x 19.25 in. Source
Material thickness	Mild steel thickness range 24 ga.–1/2 in. (13 mm). Source	Not published by manufacturer Source