IronMan 240 vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	IronMan 240	TIG200
Process	MIG and flux-cored. Spool-gun connection is described for aluminum wire. Source	DC TIG and stick. Source
Output amp range	30–280 A. Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	200 A at 24 VDC, 60% duty cycle. Source	Not published by manufacturer Source
Input voltage and plug	208 V and 240 V. Amperes input at rated load: 57.0 A at 208 V and 50.8 A at 240 V, on the 200 A, 60% row. A power cord with plug is included. The plug is not named. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	The gun note on the sheet says .023–.045 in. (0.6–1.1 mm) wire, and the included drive roll is a dual-groove .030/.035 in. roll. Wire feed speed is 50–700 ipm. Source	Not published by manufacturer Source
Weight	186 lb. Source	Not published by manufacturer Source
Material thickness	Mild steel thickness range 24 ga.–1/2 in. (13 mm). Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source