IronMan 240 vs TIG225X

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	IronMan 240	TIG225X
Process	MIG and flux-cored. Spool-gun connection is described for aluminum wire. Source	AC/DC TIG and stick. The page tells the operator to use AC for aluminum and magnesium and DC for steel, stainless, and most other metals. Source
Output amp range	30–280 A. Source	TIG 10–225 A. Stick 10–180 A. Source
Rated duty cycle	200 A at 24 VDC, 60% duty cycle. Source	TIG: 40% at max output, and 100% at 108 A on 120 V or 155 A on 240 V. Stick: 40% at max output, and 100% at 76 A on 120 V or 139 A on 240 V. Source
Input voltage and plug	208 V and 240 V. Amperes input at rated load: 57.0 A at 208 V and 50.8 A at 240 V, on the 200 A, 60% row. A power cord with plug is included. The plug is not named. Source	120 V / 240 V, single-phase, 50/60 Hz. Input amperes and a plug name are not in the specifications list. Source
Wire or rod size	The gun note on the sheet says .023–.045 in. (0.6–1.1 mm) wire, and the included drive roll is a dual-groove .030/.035 in. roll. Wire feed speed is 50–700 ipm. Source	Not published by manufacturer Source
Weight	186 lb. Source	41 lb (18.5 kg). Source
Material thickness	Mild steel thickness range 24 ga.–1/2 in. (13 mm). Source	The page says it can weld materials up to 1/2 inch thick. Source