Maxstar 161 STH vs Power MIG 260

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Maxstar 161 STH	Power MIG 260
Process	Stick (SMAW), Lift-Arc TIG (GTAW), high-frequency TIG (GTAW), and pulsed TIG (GTAW-P). High frequency and pulse are marked STH model only. Source	MIG and flux-cored. Source
Output amp range	120 V: 5–130 A DC TIG and 20–90 A DC stick. 240 V: 5–160 A DC TIG and 20–160 A DC stick. Source	30–300 A. Wire feed speed 50–700 ipm (1.3–17.7 m/min). Source
Rated duty cycle	TIG, 120 V: 90 A at 13.6 VDC, 100% duty cycle, and 130 A at 15.2 VDC, 30%. TIG, 240 V: 110 A at 14.4 VDC, 100%, and 160 A at 16.4 VDC, 20%. Stick, 120 V: 60 A at 22.4 VDC, 100%, and 90 A at 23.6 VDC, 30%. Stick, 240 V: 110 A at 24.4 VDC, 100%, and 160 A at 26.4 VDC, 20%. Source	250 A / 26.5 V / 40%. Source
Input voltage and plug	120–240 V, 1-phase. Amps input at the higher duty-point ratings: TIG 22.6 A at 120 V and 15.05 A at 240 V; stick 23.16 A at 120 V and 22.55 A at 240 V. Separate 120 V and 240 V power cords are included. Source	208/230/460/575 V, 1-phase, 60 Hz. Input current at rated output: 59/55/27/21 A in that voltage order. The 230 V figure is 55 A. This check treats that 230 V figure as the 240 V outlet class. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	13 lb. (5.9 kg). Source	247 lb (112 kg). Dimensions 37.3 x 18 x 40.4 in. Source
Material thickness	Not published by manufacturer Source	Not published by manufacturer Source