WeldFactsSheet numbers only

Home CompareMillermatic 142 vs Multimatic 220 AC/DC

Millermatic 142 vs Multimatic 220 AC/DC

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By · Checked · How we verify

Spec Millermatic 142 Multimatic 220 AC/DC
Process MIG (GMAW) and flux-cored (FCAW).
Source
 MIG (GMAW), flux-cored (FCAW), DC stick (SMAW), AC/DC TIG (GTAW), and pulsed TIG (GTAW-P).
Source
Output amp range 30–140 A.
Source
 MIG: 30–230 A. DC stick: 30–200 A. AC/DC TIG: 20–210 A. The specifications table splits those ranges by voltage: MIG 30–125 A on 120 V and 30–230 A on 240 V; stick 30–90 A on 120 V and 30–200 A on 240 V; TIG 20–140 A on 120 V and 20–210 A on 240 V.
Source
Rated duty cycle 100 A at 19 V, 60% duty cycle. 80 A at 18 V, 100% duty cycle.
Source
 MIG: 120 V, 105 A at 19.2 V, 60% duty cycle; 240 V, 200 A at 24 V, 20% duty cycle and 170 A at 21.5 V, 40% duty cycle. Stick: 120 V, 90 A at 23.6 V, 40%; 240 V, 200 A at 28.4 V, 15%. TIG: 120 V, 130 A at 15.2 V, 40%; 240 V, 210 A at 18.4 V, 20%.
Source
Input voltage and plug 120 V, 20 A, single-phase, 50/60 Hz.
Source
 120/240 V, single-phase, 50/60 Hz. Amps input at rated output: MIG 23.3 A at 120 V and 27.2 A at the 200 A / 20% 240 V rating; stick 24.5 A at 120 V and 31.3 A at 240 V; TIG 24.0 A at 120 V and 22.4 A at 240 V.
Source
Wire or rod size Set up for .024–.035 in. (0.6–0.9 mm) solid wire and .030–.045 in. (0.8–1.2 mm) flux-cored wire. Uses 4- or 8-inch spools.
Source
 Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed in the table is 60–600 ipm.
Source
Weight 33 lb.
Source
 56 lb. (25.4 kg).
Source
Material thickness Steel: 24 ga.–3/16 in. single pass. Aluminum: 18–14 ga. single pass.
Source
 Not published by manufacturer
Source

Outlet check, Millermatic 142 · Outlet check, Multimatic 220 AC/DC