WeldFactsSheet numbers only

Home CompareMillermatic 142 vs Syncrowave 212

Millermatic 142 vs Syncrowave 212

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By · Checked · How we verify

Spec Millermatic 142 Syncrowave 212
Process MIG (GMAW) and flux-cored (FCAW).
Source
 AC/DC TIG (GTAW), pulsed DC TIG (GTAW-P), DC stick (SMAW), and MIG (GMAW) with a Spoolmate 150.
Source
Output amp range 30–140 A.
Source
 AC/DC TIG: 20–210 A. DC stick: 30–200 A. MIG: 30–175 A. The specifications table narrows 120 V DC TIG to 20–140 A and 240 V DC stick to 35–160 A.
Source
Rated duty cycle 100 A at 19 V, 60% duty cycle. 80 A at 18 V, 100% duty cycle.
Source
 Quick specs lead with 130 A at 15.2 V, 60% duty cycle. The table adds, at 60%: 120 V DC TIG 110 A at 14.4 V, and 240 V DC stick 120 A at 24.8 V. It also prints 210 A at 20% and 120 A at 100% on the AC/DC TIG duty column, without tying those two lines to one voltage.
Source
Input voltage and plug 120 V, 20 A, single-phase, 50/60 Hz.
Source
 120–240 V, 1-phase, 50/60 Hz. Amps input at rated output in the table: 18.8 A for 120 V DC TIG and 11.8 A for 240 V DC TIG. The 240 V DC stick row prints 16.3 A.
Source
Wire or rod size Set up for .024–.035 in. (0.6–0.9 mm) solid wire and .030–.045 in. (0.8–1.2 mm) flux-cored wire. Uses 4- or 8-inch spools.
Source
 Not published by manufacturer
Source
Weight 33 lb.
Source
 54 lb. (24.5 kg), air-cooled machine only.
Source
Material thickness Steel: 24 ga.–3/16 in. single pass. Aluminum: 18–14 ga. single pass.
Source
 AC/DC TIG: 120 V, 20 gauge–1/8 in.; 240 V, 20 gauge–1/4 in. DC stick: 120 V, 16 gauge–3/16 in.; 240 V, 16 gauge–3/8 in. MIG spool gun: 120 V, 1/8 in.; 240 V, 1/8–3/8 in. The table does not name the metal.
Source

Outlet check, Millermatic 142 · Outlet check, Syncrowave 212