Home CompareMillermatic 211 PRO vs Handler 140EZ
Millermatic 211 PRO vs Handler 140EZ
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Millermatic 211 PRO | Handler 140EZ |
|---|---|---|
| Process | MIG (GMAW), pulsed MIG (GMAW-P), and flux-cored (FCAW). | MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. |
| Output amp range | 30–230 A on the product page. The spec sheet does not print a separate amp range by voltage. | 30–140 A. |
| Rated duty cycle | 120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle. | 90 A at 18.5 VDC, 30% duty cycle. |
| Input voltage and plug | 120 V: 27.0 A, single-phase, 50/60 Hz. 240 V: 28.9 A, single-phase, 50/60 Hz. The sheet says the cord uses MVP plugs for 120 V and 240 V and does not name a breaker size. | 120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. |
| Wire or rod size | Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. | Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. |
| Weight | 35 lb. | Not published by manufacturer |
| Material thickness | 120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. | Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. |
Outlet check, Millermatic 211 PRO · Outlet check, Handler 140EZ