Millermatic 211 PRO vs IronMan 240

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Millermatic 211 PRO	IronMan 240
Process	MIG (GMAW), pulsed MIG (GMAW-P), and flux-cored (FCAW). Source	MIG and flux-cored. Spool-gun connection is described for aluminum wire. Source
Output amp range	30–230 A on the product page. The spec sheet does not print a separate amp range by voltage. Source	30–280 A. Source
Rated duty cycle	120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle. Source	200 A at 24 VDC, 60% duty cycle. Source
Input voltage and plug	120 V: 27.0 A, single-phase, 50/60 Hz. 240 V: 28.9 A, single-phase, 50/60 Hz. The sheet says the cord uses MVP plugs for 120 V and 240 V and does not name a breaker size. Source	208 V and 240 V. Amperes input at rated load: 57.0 A at 208 V and 50.8 A at 240 V, on the 200 A, 60% row. A power cord with plug is included. The plug is not named. Source
Wire or rod size	Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	The gun note on the sheet says .023–.045 in. (0.6–1.1 mm) wire, and the included drive roll is a dual-groove .030/.035 in. roll. Wire feed speed is 50–700 ipm. Source
Weight	35 lb. Source	186 lb. Source
Material thickness	120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. Source	Mild steel thickness range 24 ga.–1/2 in. (13 mm). Source