Millermatic 211 PRO vs Power MIG 215 MPi

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Millermatic 211 PRO	Power MIG 215 MPi
Process	MIG (GMAW), pulsed MIG (GMAW-P), and flux-cored (FCAW). Source	MIG, flux-cored, DC stick, and DC TIG. Source
Output amp range	30–230 A on the product page. The spec sheet does not print a separate amp range by voltage. Source	120 V: 20–140 A DC. 230 V: 20–220 A DC. Max OCV 56 V. Source
Rated duty cycle	120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle. Source	215 A / 24.8 V / 30%. The specifications table prints that one duty-cycle figure beside input power 120/230/1/60. 215 A is above the printed 120 V output range of 20–140 A. Source
Input voltage and plug	120 V: 27.0 A, single-phase, 50/60 Hz. 240 V: 28.9 A, single-phase, 50/60 Hz. The sheet says the cord uses MVP plugs for 120 V and 240 V and does not name a breaker size. Source	120/230/1/60. Input current at rated output: 120 VAC, 15 A effective and 22 A max; 230 VAC, 15.9 A effective and 29 A max. Source
Wire or rod size	Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Wire feed speed 50–500 ipm (1.3–12.7 m/min). A wire-diameter range is not in the specifications table. Source
Weight	35 lb. Source	48 lb (21.8 kg). Source
Material thickness	120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. Source	Not published by manufacturer Source