Home CompareMillermatic 211 PRO vs Square Wave TIG 200
Millermatic 211 PRO vs Square Wave TIG 200
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Millermatic 211 PRO | Square Wave TIG 200 |
|---|---|---|
| Process | MIG (GMAW), pulsed MIG (GMAW-P), and flux-cored (FCAW). | AC/DC TIG and stick. |
| Output amp range | 30–230 A on the product page. The spec sheet does not print a separate amp range by voltage. | 120 V: TIG 10–125 A and stick 10–90 A. 230 V: TIG 10–200 A and stick 10–170 A. A footnote prints 120 V AC TIG 110 A / 25%. |
| Rated duty cycle | 120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle. | 120 V TIG: 125 A/25%, 100 A/40%, 85 A/60%. 120 V stick: 75 A/20%, 65 A/60%. 230 V TIG: 200 A/25%, 160 A/40%, 130 A/60%. 230 V stick: 170 A/20%, 100 A/60%. |
| Input voltage and plug | 120 V: 27.0 A, single-phase, 50/60 Hz. 240 V: 28.9 A, single-phase, 50/60 Hz. The sheet says the cord uses MVP plugs for 120 V and 240 V and does not name a breaker size. | 120/1/50/60 and 230/1/50/60. Input current at those rated outputs runs from 14 A to 21 A on 120 V and from 13 A to 25 A on 230 V. The highest 120 V figure is 21 A and the highest 230 V figure is 25 A. 120/230 V input cords are included. |
| Wire or rod size | Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. | Not published by manufacturer |
| Weight | 35 lb. | 46 lb (21 kg). Dimensions 14 x 10.75 x 19.25 in. |
| Material thickness | 120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. | Not published by manufacturer |
Outlet check, Millermatic 211 PRO · Outlet check, Square Wave TIG 200