Millermatic 211 PRO vs TIG225X

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Millermatic 211 PRO	TIG225X
Process	MIG (GMAW), pulsed MIG (GMAW-P), and flux-cored (FCAW). Source	AC/DC TIG and stick. The page tells the operator to use AC for aluminum and magnesium and DC for steel, stainless, and most other metals. Source
Output amp range	30–230 A on the product page. The spec sheet does not print a separate amp range by voltage. Source	TIG 10–225 A. Stick 10–180 A. Source
Rated duty cycle	120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle. Source	TIG: 40% at max output, and 100% at 108 A on 120 V or 155 A on 240 V. Stick: 40% at max output, and 100% at 76 A on 120 V or 139 A on 240 V. Source
Input voltage and plug	120 V: 27.0 A, single-phase, 50/60 Hz. 240 V: 28.9 A, single-phase, 50/60 Hz. The sheet says the cord uses MVP plugs for 120 V and 240 V and does not name a breaker size. Source	120 V / 240 V, single-phase, 50/60 Hz. Input amperes and a plug name are not in the specifications list. Source
Wire or rod size	Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source	Not published by manufacturer Source
Weight	35 lb. Source	41 lb (18.5 kg). Source
Material thickness	120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. Source	The page says it can weld materials up to 1/2 inch thick. Source