Millermatic 252 vs Maxstar 161 STH

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Millermatic 252	Maxstar 161 STH
Process	MIG (GMAW) and flux-cored (FCAW). Source	Stick (SMAW), Lift-Arc TIG (GTAW), high-frequency TIG (GTAW), and pulsed TIG (GTAW-P). High frequency and pulse are marked STH model only. Source
Output amp range	30–300 A. Source	120 V: 5–130 A DC TIG and 20–90 A DC stick. 240 V: 5–160 A DC TIG and 20–160 A DC stick. Source
Rated duty cycle	200 A at 24 VDC, 60% duty cycle. 250 A at 26.5 VDC, 40% duty cycle. Source	TIG, 120 V: 90 A at 13.6 VDC, 100% duty cycle, and 130 A at 15.2 VDC, 30%. TIG, 240 V: 110 A at 14.4 VDC, 100%, and 160 A at 16.4 VDC, 20%. Stick, 120 V: 60 A at 22.4 VDC, 100%, and 90 A at 23.6 VDC, 30%. Stick, 240 V: 110 A at 24.4 VDC, 100%, and 160 A at 26.4 VDC, 20%. Source
Input voltage and plug	208/240 V, single-phase, 60 Hz, or 230/460/575 V, single-phase, 60 Hz. On the 208/240 V row, amps input at the 200 A, 60% rating are 57.0 A at 208 V and 50.8 A at 240 V. Source	120–240 V, 1-phase. Amps input at the higher duty-point ratings: TIG 22.6 A at 120 V and 15.05 A at 240 V; stick 23.16 A at 120 V and 22.55 A at 240 V. Separate 120 V and 240 V power cords are included. Source
Wire or rod size	Solid/stainless steel .023–.045 in. (0.6–1.2 mm). Flux-cored .030–.045 in. (0.8–1.2 mm). 12 in. spool. Source	Not published by manufacturer Source
Weight	205 lb. (93 kg). Source	13 lb. (5.9 kg). Source
Material thickness	Not published by manufacturer Source	Not published by manufacturer Source