Millermatic 255 vs Handler 210MVP

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Millermatic 255	Handler 210MVP
Process	MIG (GMAW), pulsed MIG (GMAW-P), and flux-cored (FCAW). Source	MIG and flux-cored. Spool-gun circuitry is described for aluminum wire. A gas solenoid and regulator are included. Source
Output amp range	20–350 A. Source	115 V: 25–140 A. 230 V: 25–210 A. Source
Rated duty cycle	230 A at 25.5 V, 60% duty cycle. Source	115 V: 90 A at 19 VDC, 20% duty cycle. 230 V: 150 A at 23 VDC, 30% duty cycle. Source
Input voltage and plug	208–240 V, single-phase. Auto-Line 208–575 V, single-phase. The quick specs do not print input amperes. Source	115 V or 230 V, 60 Hz. Amps input at rated output: 20 A at 115 V and 24 A at 230 V. The cord includes 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs. Source
Wire or rod size	Not published by manufacturer Source	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source
Weight	Machine only: 84 lb. (38 kg). Machine with running gear: 148 lb. (67 kg). Source	79 lb. (35.8 kg). Source
Material thickness	Not published by manufacturer Source	Mild steel thickness range 24 ga.–3/8 in., in a single pass. The sheet says thicker material is run with multiple passes and does not print that second maximum. Source