Home CompareMulti-Handler 200 vs Rebel EMP 215ic
Multi-Handler 200 vs Rebel EMP 215ic
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Multi-Handler 200 | Rebel EMP 215ic |
|---|---|---|
| Process | MIG, flux-cored, DC TIG, and stick. | GMAW (MIG), GTAW (TIG), and SMAW (stick). Flux-cored wire is listed in the wire-diameter table. |
| Output amp range | MIG/flux-cored: 30–200 A. DC TIG: 20–200 A. Stick: 30–200 A. The table narrows 120 V MIG to 30–120 A, 120 V TIG to 20–140 A, and 120 V stick to 30–100 A. | MIG setting range: 15 A / 14.75 V to 130 A / 20.5 V on 120 V, and to 235 A / 26.0 V on 230 V. TIG: 5 A to 130 A on 120 V and to 200 A on 230 V. Stick: 6 A to 130 A on 120 V and 16 A to 180 A on 230 V. |
| Rated duty cycle | At 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V; DC TIG 105 A at 14.2 V on 120 V and 165 A at 16.6 V on 240 V; stick 90 A at 23.6 V on 120 V and 140 A at 25.6 V on 240 V. | MIG, 230 V: 205 A / 24.25 V at 25% and 235 A / 26 V at 15%. MIG, 120 V, 20 A breaker: 130 A / 20.5 V at 20%. TIG, 230 V: 180 A / 17.2 V at 30%. Stick, 230 V: 180 A / 27.2 V at 25%. The table prints more duty points at 40%, 60%, and 100%. |
| Input voltage and plug | 120 V or 240 V, 50/60 Hz. MVP plugs: 5-15P (120 V, 15 A) and 6-50P (240 V, 50 A). Amps input at rated output, MIG: 23.0 A at 120 V and 19.0 A at 240 V. DC TIG: 16.7 A and 14.7 A. Stick: 22.0 A and 17.9 A. | 120 V or 230 V, 1-phase, 50/60 Hz, ±10%. Imax MIG: 20.8 A on a 15 A breaker and 28.6 A on a 20 A breaker at 120 V; 30 A at 230 V (27.6 A at 25% duty cycle). The installation guide’s maximum recommended time-delay fuse or breaker is 30 A, and the maximum normal fuse is 50 A, for both supply voltages. Input current at maximum output in that guide is 30 A. |
| Wire or rod size | Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed on the product page is 60–650 ipm. | Mild steel solid wire .023–.035 in. (0.6–0.9 mm). Stainless solid wire .030–.035 in. (0.8–0.9 mm). Flux-cored wire .030–.045 in. (0.8–1.1 mm). Aluminum .030–3/64 in. (0.8–1.2 mm). Spool size 4–8 in. |
| Weight | 38.4 lb on the product page. The spec sheet says the machine weighs under 39 pounds. | 42 lb (19.1 kg). Dimensions 23 × 9 × 16 in. |
| Material thickness | Mild steel: MIG/flux-cored 24 ga.–3/8 in., DC TIG 22 ga.–3/16 in., stick 16 ga.–3/8 in. | Not published by manufacturer |
Outlet check, Multi-Handler 200 · Outlet check, Rebel EMP 215ic