Skip to content

WeldFactsSheet numbers only

Home Compare Multimatic 220 AC/DC vs Dynasty 210

Multimatic 220 AC/DC vs Dynasty 210

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By the WeldFacts editorial team · Checked 2 November 2026 · How we verify

Spec	Multimatic 220 AC/DC	Dynasty 210
Process	MIG (GMAW), flux-cored (FCAW), DC stick (SMAW), AC/DC TIG (GTAW), and pulsed TIG (GTAW-P). Source	AC/DC TIG (GTAW), pulsed TIG (GTAW-P), and stick (SMAW). Source
Output amp range	MIG: 30–230 A. DC stick: 30–200 A. AC/DC TIG: 20–210 A. The specifications table splits those ranges by voltage: MIG 30–125 A on 120 V and 30–230 A on 240 V; stick 30–90 A on 120 V and 30–200 A on 240 V; TIG 20–140 A on 120 V and 20–210 A on 240 V. Source	1–210 A DC and 2–210 A AC. Source
Rated duty cycle	MIG: 120 V, 105 A at 19.2 V, 60% duty cycle; 240 V, 200 A at 24 V, 20% duty cycle and 170 A at 21.5 V, 40% duty cycle. Stick: 120 V, 90 A at 23.6 V, 40%; 240 V, 200 A at 28.4 V, 15%. TIG: 120 V, 130 A at 15.2 V, 40%; 240 V, 210 A at 18.4 V, 20%. Source	210 A at 18.4 V, 60% duty cycle. Source
Input voltage and plug	120/240 V, single-phase, 50/60 Hz. Amps input at rated output: MIG 23.3 A at 120 V and 27.2 A at the 200 A / 20% 240 V rating; stick 24.5 A at 120 V and 31.3 A at 240 V; TIG 24.0 A at 120 V and 22.4 A at 240 V. Source	120–480 V, 3-phase or 1-phase. The quick specs do not print input amperes. Source
Wire or rod size	Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed in the table is 60–600 ipm. Source	Not published by manufacturer Source
Weight	56 lb. (25.4 kg). Source	47 lb. (21.3 kg). Source
Material thickness	Not published by manufacturer Source	Not published by manufacturer Source

Outlet check, Multimatic 220 AC/DC · Outlet check, Dynasty 210