Skip to content

WeldFactsSheet numbers only

Home Compare Multimatic 220 AC/DC vs IronMan 240

Multimatic 220 AC/DC vs IronMan 240

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By the WeldFacts editorial team · Checked 2 November 2026 · How we verify

Spec	Multimatic 220 AC/DC	IronMan 240
Process	MIG (GMAW), flux-cored (FCAW), DC stick (SMAW), AC/DC TIG (GTAW), and pulsed TIG (GTAW-P). Source	MIG and flux-cored. Spool-gun connection is described for aluminum wire. Source
Output amp range	MIG: 30–230 A. DC stick: 30–200 A. AC/DC TIG: 20–210 A. The specifications table splits those ranges by voltage: MIG 30–125 A on 120 V and 30–230 A on 240 V; stick 30–90 A on 120 V and 30–200 A on 240 V; TIG 20–140 A on 120 V and 20–210 A on 240 V. Source	30–280 A. Source
Rated duty cycle	MIG: 120 V, 105 A at 19.2 V, 60% duty cycle; 240 V, 200 A at 24 V, 20% duty cycle and 170 A at 21.5 V, 40% duty cycle. Stick: 120 V, 90 A at 23.6 V, 40%; 240 V, 200 A at 28.4 V, 15%. TIG: 120 V, 130 A at 15.2 V, 40%; 240 V, 210 A at 18.4 V, 20%. Source	200 A at 24 VDC, 60% duty cycle. Source
Input voltage and plug	120/240 V, single-phase, 50/60 Hz. Amps input at rated output: MIG 23.3 A at 120 V and 27.2 A at the 200 A / 20% 240 V rating; stick 24.5 A at 120 V and 31.3 A at 240 V; TIG 24.0 A at 120 V and 22.4 A at 240 V. Source	208 V and 240 V. Amperes input at rated load: 57.0 A at 208 V and 50.8 A at 240 V, on the 200 A, 60% row. A power cord with plug is included. The plug is not named. Source
Wire or rod size	Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed in the table is 60–600 ipm. Source	The gun note on the sheet says .023–.045 in. (0.6–1.1 mm) wire, and the included drive roll is a dual-groove .030/.035 in. roll. Wire feed speed is 50–700 ipm. Source
Weight	56 lb. (25.4 kg). Source	186 lb. Source
Material thickness	Not published by manufacturer Source	Mild steel thickness range 24 ga.–1/2 in. (13 mm). Source

Outlet check, Multimatic 220 AC/DC · Outlet check, IronMan 240