Home CompareMultimatic 220 AC/DC vs Multi-Handler 200
Multimatic 220 AC/DC vs Multi-Handler 200
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Multimatic 220 AC/DC | Multi-Handler 200 |
|---|---|---|
| Process | MIG (GMAW), flux-cored (FCAW), DC stick (SMAW), AC/DC TIG (GTAW), and pulsed TIG (GTAW-P). | MIG, flux-cored, DC TIG, and stick. |
| Output amp range | MIG: 30–230 A. DC stick: 30–200 A. AC/DC TIG: 20–210 A. The specifications table splits those ranges by voltage: MIG 30–125 A on 120 V and 30–230 A on 240 V; stick 30–90 A on 120 V and 30–200 A on 240 V; TIG 20–140 A on 120 V and 20–210 A on 240 V. | MIG/flux-cored: 30–200 A. DC TIG: 20–200 A. Stick: 30–200 A. The table narrows 120 V MIG to 30–120 A, 120 V TIG to 20–140 A, and 120 V stick to 30–100 A. |
| Rated duty cycle | MIG: 120 V, 105 A at 19.2 V, 60% duty cycle; 240 V, 200 A at 24 V, 20% duty cycle and 170 A at 21.5 V, 40% duty cycle. Stick: 120 V, 90 A at 23.6 V, 40%; 240 V, 200 A at 28.4 V, 15%. TIG: 120 V, 130 A at 15.2 V, 40%; 240 V, 210 A at 18.4 V, 20%. | At 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V; DC TIG 105 A at 14.2 V on 120 V and 165 A at 16.6 V on 240 V; stick 90 A at 23.6 V on 120 V and 140 A at 25.6 V on 240 V. |
| Input voltage and plug | 120/240 V, single-phase, 50/60 Hz. Amps input at rated output: MIG 23.3 A at 120 V and 27.2 A at the 200 A / 20% 240 V rating; stick 24.5 A at 120 V and 31.3 A at 240 V; TIG 24.0 A at 120 V and 22.4 A at 240 V. | 120 V or 240 V, 50/60 Hz. MVP plugs: 5-15P (120 V, 15 A) and 6-50P (240 V, 50 A). Amps input at rated output, MIG: 23.0 A at 120 V and 19.0 A at 240 V. DC TIG: 16.7 A and 14.7 A. Stick: 22.0 A and 17.9 A. |
| Wire or rod size | Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed in the table is 60–600 ipm. | Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed on the product page is 60–650 ipm. |
| Weight | 56 lb. (25.4 kg). | 38.4 lb on the product page. The spec sheet says the machine weighs under 39 pounds. |
| Material thickness | Not published by manufacturer | Mild steel: MIG/flux-cored 24 ga.–3/8 in., DC TIG 22 ga.–3/16 in., stick 16 ga.–3/8 in. |
Outlet check, Multimatic 220 AC/DC · Outlet check, Multi-Handler 200