Multimatic 235 vs Handler 140EZ

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Multimatic 235	Handler 140EZ
Process	MIG (GMAW), flux-cored (FCAW), DC stick (SMAW), DC Lift-Arc TIG (GTAW), and pulsed TIG (GTAW-P). Source	MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. Source
Output amp range	20–235 A. Source	30–140 A. Source
Rated duty cycle	MIG: 170 A at 22.5 V, 60% duty cycle. Stick: 150 A at 26 V, 60% duty cycle. TIG: 180 A at 17.2 V, 60% duty cycle. Source	90 A at 18.5 VDC, 30% duty cycle. Source
Input voltage and plug	240 V, single-phase. Input amperes are not in the quick specs. Source	120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. Source
Wire or rod size	Not published by manufacturer Source	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source
Weight	Machine only: 63 lb. (29 kg). Machine with running gear: 127 lb. (58 kg). Source	Not published by manufacturer Source
Material thickness	Not published by manufacturer Source	Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. Source