Multimatic 235 vs Handler 210i

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Multimatic 235	Handler 210i
Process	MIG (GMAW), flux-cored (FCAW), DC stick (SMAW), DC Lift-Arc TIG (GTAW), and pulsed TIG (GTAW-P). Source	MIG and flux-cored. The included drive roll covers solid and flux-cored wire, and spool-gun circuitry is described for aluminum wire. Source
Output amp range	20–235 A. Source	120 V: 30–140 A. 240 V: 30–210 A. Source
Rated duty cycle	MIG: 170 A at 22.5 V, 60% duty cycle. Stick: 150 A at 26 V, 60% duty cycle. TIG: 180 A at 17.2 V, 60% duty cycle. Source	120 V, 15 A: 45 A at 16.3 VDC, 100% duty cycle. 120 V, 20 A: 90 A at 18.5 VDC, 25% duty cycle, and 60 A at 17.0 VDC, 100% duty cycle. 240 V: 210 A at 24.5 VDC, 25% duty cycle, and 105 A at 19.3 VDC, 100% duty cycle. Source
Input voltage and plug	240 V, single-phase. Input amperes are not in the quick specs. Source	120 V or 240 V, 50/60 Hz, with an included adapter for both. Amps input at rated output: 13.8 A on the 120 V, 15 A row; 27.6 A on the 120 V, 20 A row; 44.3 A on 240 V. Source
Wire or rod size	Not published by manufacturer Source	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source
Weight	Machine only: 63 lb. (29 kg). Machine with running gear: 127 lb. (58 kg). Source	26 lb. The sheet says the machine weighs only 26 pounds. Source
Material thickness	Not published by manufacturer Source	Mild steel thickness range 24 ga.–3/8 in., in a single pass, with thicker material by multiple passes. Source