Multimatic 235 vs Maxstar 161 STH

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Multimatic 235	Maxstar 161 STH
Process	MIG (GMAW), flux-cored (FCAW), DC stick (SMAW), DC Lift-Arc TIG (GTAW), and pulsed TIG (GTAW-P). Source	Stick (SMAW), Lift-Arc TIG (GTAW), high-frequency TIG (GTAW), and pulsed TIG (GTAW-P). High frequency and pulse are marked STH model only. Source
Output amp range	20–235 A. Source	120 V: 5–130 A DC TIG and 20–90 A DC stick. 240 V: 5–160 A DC TIG and 20–160 A DC stick. Source
Rated duty cycle	MIG: 170 A at 22.5 V, 60% duty cycle. Stick: 150 A at 26 V, 60% duty cycle. TIG: 180 A at 17.2 V, 60% duty cycle. Source	TIG, 120 V: 90 A at 13.6 VDC, 100% duty cycle, and 130 A at 15.2 VDC, 30%. TIG, 240 V: 110 A at 14.4 VDC, 100%, and 160 A at 16.4 VDC, 20%. Stick, 120 V: 60 A at 22.4 VDC, 100%, and 90 A at 23.6 VDC, 30%. Stick, 240 V: 110 A at 24.4 VDC, 100%, and 160 A at 26.4 VDC, 20%. Source
Input voltage and plug	240 V, single-phase. Input amperes are not in the quick specs. Source	120–240 V, 1-phase. Amps input at the higher duty-point ratings: TIG 22.6 A at 120 V and 15.05 A at 240 V; stick 23.16 A at 120 V and 22.55 A at 240 V. Separate 120 V and 240 V power cords are included. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	Machine only: 63 lb. (29 kg). Machine with running gear: 127 lb. (58 kg). Source	13 lb. (5.9 kg). Source
Material thickness	Not published by manufacturer Source	Not published by manufacturer Source