Power MIG 210 MP vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Power MIG 210 MP	TIG200
Process	MIG, stick, TIG, and flux-cored. The rated-output column is labeled MIG. Source	DC TIG and stick. Source
Output amp range	120 V: 20–140 A DC, max OCV 56. 230 V: 20–220 A DC, max OCV 56. Wire feed speed 50–500 ipm (1.3–12.7 m/min). Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	MIG: 120 V, 100 A / 19.0 V / 40%. 230 V, 200 A / 24 V / 25%. Source	Not published by manufacturer Source
Input voltage and plug	120/1/60 and 230/1/60. Effective input current at rated output: 15 A at 120 V and 14.7 A at 230 V. 120 V and 230 V input cables are included with K3963-1. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Included drive rolls are 0.025–0.030 in. (0.6–0.8 mm) and 0.035 in. (0.9 mm), plus 0.030–0.045 in. (0.8–1.1 mm) knurled drive rolls. The specifications table itself does not print a wire-capacity range. Source	Not published by manufacturer Source
Weight	40 lb (18 kg). Source	Not published by manufacturer Source
Material thickness	Not published by manufacturer Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source