Power MIG 210 MP vs TIG225X

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Power MIG 210 MP	TIG225X
Process	MIG, stick, TIG, and flux-cored. The rated-output column is labeled MIG. Source	AC/DC TIG and stick. The page tells the operator to use AC for aluminum and magnesium and DC for steel, stainless, and most other metals. Source
Output amp range	120 V: 20–140 A DC, max OCV 56. 230 V: 20–220 A DC, max OCV 56. Wire feed speed 50–500 ipm (1.3–12.7 m/min). Source	TIG 10–225 A. Stick 10–180 A. Source
Rated duty cycle	MIG: 120 V, 100 A / 19.0 V / 40%. 230 V, 200 A / 24 V / 25%. Source	TIG: 40% at max output, and 100% at 108 A on 120 V or 155 A on 240 V. Stick: 40% at max output, and 100% at 76 A on 120 V or 139 A on 240 V. Source
Input voltage and plug	120/1/60 and 230/1/60. Effective input current at rated output: 15 A at 120 V and 14.7 A at 230 V. 120 V and 230 V input cables are included with K3963-1. Source	120 V / 240 V, single-phase, 50/60 Hz. Input amperes and a plug name are not in the specifications list. Source
Wire or rod size	Included drive rolls are 0.025–0.030 in. (0.6–0.8 mm) and 0.035 in. (0.9 mm), plus 0.030–0.045 in. (0.8–1.1 mm) knurled drive rolls. The specifications table itself does not print a wire-capacity range. Source	Not published by manufacturer Source
Weight	40 lb (18 kg). Source	41 lb (18.5 kg). Source
Material thickness	Not published by manufacturer Source	The page says it can weld materials up to 1/2 inch thick. Source