Power MIG 210 MP vs TIG230

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Power MIG 210 MP	TIG230
Process	MIG, stick, TIG, and flux-cored. The rated-output column is labeled MIG. Source	AC/DC TIG and stick. The page lists nine AC waveforms, including square, sine, triangle, and hybrid. Source
Output amp range	120 V: 20–140 A DC, max OCV 56. 230 V: 20–220 A DC, max OCV 56. Wire feed speed 50–500 ipm (1.3–12.7 m/min). Source	TIG 2–230 A. Stick 10–200 A. Source
Rated duty cycle	MIG: 120 V, 100 A / 19.0 V / 40%. 230 V, 200 A / 24 V / 25%. Source	TIG: 35% at 230 A, 60% at 175 A, 100% at 136 A. Stick: 35% at 200 A, 60% at 152 A, 100% at 118 A. The duty lines are not split by voltage. Source
Input voltage and plug	120/1/60 and 230/1/60. Effective input current at rated output: 15 A at 120 V and 14.7 A at 230 V. 120 V and 230 V input cables are included with K3963-1. Source	90–275 V, 50–60 Hz. That range covers a 120 V outlet and a 240 V outlet. Input amperes are not in the specifications block. Source
Wire or rod size	Included drive rolls are 0.025–0.030 in. (0.6–0.8 mm) and 0.035 in. (0.9 mm), plus 0.030–0.045 in. (0.8–1.1 mm) knurled drive rolls. The specifications table itself does not print a wire-capacity range. Source	Not published by manufacturer Source
Weight	40 lb (18 kg). Source	46 lb. Dimensions 22 in. long, 8 in. wide, 16 in. high. Source
Material thickness	Not published by manufacturer Source	Not published by manufacturer Source