Power MIG 215 MPi vs Square Wave TIG 200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Power MIG 215 MPi	Square Wave TIG 200
Process	MIG, flux-cored, DC stick, and DC TIG. Source	AC/DC TIG and stick. Source
Output amp range	120 V: 20–140 A DC. 230 V: 20–220 A DC. Max OCV 56 V. Source	120 V: TIG 10–125 A and stick 10–90 A. 230 V: TIG 10–200 A and stick 10–170 A. A footnote prints 120 V AC TIG 110 A / 25%. Source
Rated duty cycle	215 A / 24.8 V / 30%. The specifications table prints that one duty-cycle figure beside input power 120/230/1/60. 215 A is above the printed 120 V output range of 20–140 A. Source	120 V TIG: 125 A/25%, 100 A/40%, 85 A/60%. 120 V stick: 75 A/20%, 65 A/60%. 230 V TIG: 200 A/25%, 160 A/40%, 130 A/60%. 230 V stick: 170 A/20%, 100 A/60%. Source
Input voltage and plug	120/230/1/60. Input current at rated output: 120 VAC, 15 A effective and 22 A max; 230 VAC, 15.9 A effective and 29 A max. Source	120/1/50/60 and 230/1/50/60. Input current at those rated outputs runs from 14 A to 21 A on 120 V and from 13 A to 25 A on 230 V. The highest 120 V figure is 21 A and the highest 230 V figure is 25 A. 120/230 V input cords are included. Source
Wire or rod size	Wire feed speed 50–500 ipm (1.3–12.7 m/min). A wire-diameter range is not in the specifications table. Source	Not published by manufacturer Source
Weight	48 lb (21.8 kg). Source	46 lb (21 kg). Dimensions 14 x 10.75 x 19.25 in. Source
Material thickness	Not published by manufacturer Source	Not published by manufacturer Source