Power MIG 215 MPi vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Power MIG 215 MPi	TIG200
Process	MIG, flux-cored, DC stick, and DC TIG. Source	DC TIG and stick. Source
Output amp range	120 V: 20–140 A DC. 230 V: 20–220 A DC. Max OCV 56 V. Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	215 A / 24.8 V / 30%. The specifications table prints that one duty-cycle figure beside input power 120/230/1/60. 215 A is above the printed 120 V output range of 20–140 A. Source	Not published by manufacturer Source
Input voltage and plug	120/230/1/60. Input current at rated output: 120 VAC, 15 A effective and 22 A max; 230 VAC, 15.9 A effective and 29 A max. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Wire feed speed 50–500 ipm (1.3–12.7 m/min). A wire-diameter range is not in the specifications table. Source	Not published by manufacturer Source
Weight	48 lb (21.8 kg). Source	Not published by manufacturer Source
Material thickness	Not published by manufacturer Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source