Power MIG 215 MPi vs TIG225X

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Power MIG 215 MPi	TIG225X
Process	MIG, flux-cored, DC stick, and DC TIG. Source	AC/DC TIG and stick. The page tells the operator to use AC for aluminum and magnesium and DC for steel, stainless, and most other metals. Source
Output amp range	120 V: 20–140 A DC. 230 V: 20–220 A DC. Max OCV 56 V. Source	TIG 10–225 A. Stick 10–180 A. Source
Rated duty cycle	215 A / 24.8 V / 30%. The specifications table prints that one duty-cycle figure beside input power 120/230/1/60. 215 A is above the printed 120 V output range of 20–140 A. Source	TIG: 40% at max output, and 100% at 108 A on 120 V or 155 A on 240 V. Stick: 40% at max output, and 100% at 76 A on 120 V or 139 A on 240 V. Source
Input voltage and plug	120/230/1/60. Input current at rated output: 120 VAC, 15 A effective and 22 A max; 230 VAC, 15.9 A effective and 29 A max. Source	120 V / 240 V, single-phase, 50/60 Hz. Input amperes and a plug name are not in the specifications list. Source
Wire or rod size	Wire feed speed 50–500 ipm (1.3–12.7 m/min). A wire-diameter range is not in the specifications table. Source	Not published by manufacturer Source
Weight	48 lb (21.8 kg). Source	41 lb (18.5 kg). Source
Material thickness	Not published by manufacturer Source	The page says it can weld materials up to 1/2 inch thick. Source