Power MIG 260 vs Power MIG 210 MP

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Power MIG 260	Power MIG 210 MP
Process	MIG and flux-cored. Source	MIG, stick, TIG, and flux-cored. The rated-output column is labeled MIG. Source
Output amp range	30–300 A. Wire feed speed 50–700 ipm (1.3–17.7 m/min). Source	120 V: 20–140 A DC, max OCV 56. 230 V: 20–220 A DC, max OCV 56. Wire feed speed 50–500 ipm (1.3–12.7 m/min). Source
Rated duty cycle	250 A / 26.5 V / 40%. Source	MIG: 120 V, 100 A / 19.0 V / 40%. 230 V, 200 A / 24 V / 25%. Source
Input voltage and plug	208/230/460/575 V, 1-phase, 60 Hz. Input current at rated output: 59/55/27/21 A in that voltage order. The 230 V figure is 55 A. This check treats that 230 V figure as the 240 V outlet class. Source	120/1/60 and 230/1/60. Effective input current at rated output: 15 A at 120 V and 14.7 A at 230 V. 120 V and 230 V input cables are included with K3963-1. Source
Wire or rod size	Not published by manufacturer Source	Included drive rolls are 0.025–0.030 in. (0.6–0.8 mm) and 0.035 in. (0.9 mm), plus 0.030–0.045 in. (0.8–1.1 mm) knurled drive rolls. The specifications table itself does not print a wire-capacity range. Source
Weight	247 lb (112 kg). Dimensions 37.3 x 18 x 40.4 in. Source	40 lb (18 kg). Source
Material thickness	Not published by manufacturer Source	Not published by manufacturer Source