Power MIG 260 vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Power MIG 260	TIG200
Process	MIG and flux-cored. Source	DC TIG and stick. Source
Output amp range	30–300 A. Wire feed speed 50–700 ipm (1.3–17.7 m/min). Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	250 A / 26.5 V / 40%. Source	Not published by manufacturer Source
Input voltage and plug	208/230/460/575 V, 1-phase, 60 Hz. Input current at rated output: 59/55/27/21 A in that voltage order. The 230 V figure is 55 A. This check treats that 230 V figure as the 240 V outlet class. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	247 lb (112 kg). Dimensions 37.3 x 18 x 40.4 in. Source	Not published by manufacturer Source
Material thickness	Not published by manufacturer Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source