Rebel EMP 215ic vs TIG230

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By the WeldFacts editorial team · Checked 2 November 2026 · How we verify

Spec	Rebel EMP 215ic	TIG230
Process	GMAW (MIG), GTAW (TIG), and SMAW (stick). Flux-cored wire is listed in the wire-diameter table. Source	AC/DC TIG and stick. The page lists nine AC waveforms, including square, sine, triangle, and hybrid. Source
Output amp range	MIG setting range: 15 A / 14.75 V to 130 A / 20.5 V on 120 V, and to 235 A / 26.0 V on 230 V. TIG: 5 A to 130 A on 120 V and to 200 A on 230 V. Stick: 6 A to 130 A on 120 V and 16 A to 180 A on 230 V. Source	TIG 2–230 A. Stick 10–200 A. Source
Rated duty cycle	MIG, 230 V: 205 A / 24.25 V at 25% and 235 A / 26 V at 15%. MIG, 120 V, 20 A breaker: 130 A / 20.5 V at 20%. TIG, 230 V: 180 A / 17.2 V at 30%. Stick, 230 V: 180 A / 27.2 V at 25%. The table prints more duty points at 40%, 60%, and 100%. Source	TIG: 35% at 230 A, 60% at 175 A, 100% at 136 A. Stick: 35% at 200 A, 60% at 152 A, 100% at 118 A. The duty lines are not split by voltage. Source
Input voltage and plug	120 V or 230 V, 1-phase, 50/60 Hz, ±10%. Imax MIG: 20.8 A on a 15 A breaker and 28.6 A on a 20 A breaker at 120 V; 30 A at 230 V (27.6 A at 25% duty cycle). The installation guide’s maximum recommended time-delay fuse or breaker is 30 A, and the maximum normal fuse is 50 A, for both supply voltages. Input current at maximum output in that guide is 30 A. Source	90–275 V, 50–60 Hz. That range covers a 120 V outlet and a 240 V outlet. Input amperes are not in the specifications block. Source
Wire or rod size	Mild steel solid wire .023–.035 in. (0.6–0.9 mm). Stainless solid wire .030–.035 in. (0.8–0.9 mm). Flux-cored wire .030–.045 in. (0.8–1.1 mm). Aluminum .030–3/64 in. (0.8–1.2 mm). Spool size 4–8 in. Source	Not published by manufacturer Source
Weight	42 lb (19.1 kg). Dimensions 23 × 9 × 16 in. Source	46 lb. Dimensions 22 in. long, 8 in. wide, 16 in. high. Source
Material thickness	Not published by manufacturer Source	Not published by manufacturer Source

Outlet check, Rebel EMP 215ic · Outlet check, TIG230