Home CompareSquare Wave TIG 200 vs Power MIG 210 MP
Square Wave TIG 200 vs Power MIG 210 MP
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Square Wave TIG 200 | Power MIG 210 MP |
|---|---|---|
| Process | AC/DC TIG and stick. | MIG, stick, TIG, and flux-cored. The rated-output column is labeled MIG. |
| Output amp range | 120 V: TIG 10–125 A and stick 10–90 A. 230 V: TIG 10–200 A and stick 10–170 A. A footnote prints 120 V AC TIG 110 A / 25%. | 120 V: 20–140 A DC, max OCV 56. 230 V: 20–220 A DC, max OCV 56. Wire feed speed 50–500 ipm (1.3–12.7 m/min). |
| Rated duty cycle | 120 V TIG: 125 A/25%, 100 A/40%, 85 A/60%. 120 V stick: 75 A/20%, 65 A/60%. 230 V TIG: 200 A/25%, 160 A/40%, 130 A/60%. 230 V stick: 170 A/20%, 100 A/60%. | MIG: 120 V, 100 A / 19.0 V / 40%. 230 V, 200 A / 24 V / 25%. |
| Input voltage and plug | 120/1/50/60 and 230/1/50/60. Input current at those rated outputs runs from 14 A to 21 A on 120 V and from 13 A to 25 A on 230 V. The highest 120 V figure is 21 A and the highest 230 V figure is 25 A. 120/230 V input cords are included. | 120/1/60 and 230/1/60. Effective input current at rated output: 15 A at 120 V and 14.7 A at 230 V. 120 V and 230 V input cables are included with K3963-1. |
| Wire or rod size | Not published by manufacturer | Included drive rolls are 0.025–0.030 in. (0.6–0.8 mm) and 0.035 in. (0.9 mm), plus 0.030–0.045 in. (0.8–1.1 mm) knurled drive rolls. The specifications table itself does not print a wire-capacity range. |
| Weight | 46 lb (21 kg). Dimensions 14 x 10.75 x 19.25 in. | 40 lb (18 kg). |
| Material thickness | Not published by manufacturer | Not published by manufacturer |
Outlet check, Square Wave TIG 200 · Outlet check, Power MIG 210 MP